Learn the steps below to reset the toner Brother TN420 / TN450, if you have questions, write a review, we will gladly help you.
A Brother toner cartridges can be filled and not cause problems, in some cases can receive the error that the toner cartridge is still empty.
The Brother TN420 / TN450 are no exception, we can one day fill these toner refill even without this message appears, then the procedure to reset the toner.
If you have any questions just write a comment will gladly help you, proceed.
The Brother TN420 / TN450 are no exception, we can one day fill these toner refill even without this message appears, then the procedure to reset the toner.
If you have any questions just write a comment will gladly help you, proceed.
- Make sure the printer is turned off
- Open the front door giving access to the toner cartridge
- Keep pressing the GO button while turning the printer
- When the toner and drum LED light up, the printer as an error has occurred, is when to release the GO button, then all LEDs will go out.
- Now press the GO button twice and the mistakes of the toner and drum disappear.
Depending what the toner cartridge you are using:
- TN420 press the GO button six (6) times
- TN450 press the GO button seven (7) times
- The Error LED should flash again, then close the front cover
If after starting this procedure does not work properly, just type a commentary in the post, gladly have a comment as quickly as possible.
COMMENTS