Reset the printer Epson L350 full pads

All the process to fix the error waste ink pad counter full in Epson L350 printer, follow the steps below.

With this printer you have it all, copy, scanner and printer in one place. The speed of this printer stands out compared to others of its type, printing 33 pages per minute in black and color about 15 pages.

reset printer epson l350

We can scan from 600-1200 dpi, manufactures this team brings software to scan edit documents in OCR, this like any other Epson team has 12 months or 15,000 printed pages.
When you reach this amount of pages we fail we indicates full pads to eliminate this error normally have to go through Epson service, which has a very high cost.

The process to reset the Epson L350 printer is the same as for other Epson printers, we have a software which run with the connected printer featuring error, we waste the ink pad and restore counter to zero again.

Pay with PayPal...
Program for reset the Epson L350 full pad

First thing we do is download the file to reset the Epson L350 printer, we recommend you download on the desktop, the following is to decompress this file. Follow the steps below are the installation procedure for the reset function.

Step No.1
When we download the file we will see that this is compressed, we just have to decompress it and in order to do this we need a program, we recommend using Winrar, to know how to perform a decompression see the following instructions on how to unzip a document. see image...

click on Extract and a folder will appear

Step No. 2
After we have the decompressed file we double click on the program file that has the following image. It is necessary to run this file and we can do it by double clicking on the right mouse botton and running the file.

Step No. 3
A message appears saying that this program is free just click on "accept".

Step No. 4
In the next step we have to select the option "Select" on the top right. see image...

click on select

Step No. 5
Next the window that lets you select the port to which the printer is connected appears in this we select the "Auto Select" option and click on OK. see image below...

we leave the port in Auto selection mode

Step No. 6
In Model Name will appear the name of reset we are trying to install, and then the "Destination" we leave it as shown and in the port we leave the default option in this case is "Auto Selection". See the previous image, if you have a question make a comment.

After we click OK, the window disappears where we selected Auto selection, and the main program window will stay in this moment we have to select the option Particular Adjustment Mode. view image...

particular adjustment mode

Step No. 7
In this step we have to be very careful, if we select any other option it can be fatal to our printer, even we can delete the configuration of our printer forever, it is recommended to only select the option that we will tell you.

The option that we have to select is called Waste Ink Pad Counter and we click on OK to continue.

This will restore the printer to tell there is no ink any longer even if this is done we have to know that the residues are full, though perhaps the printer come to think this by the number of pages that have been printed with it, but in reality can cause problems over time.

just click waste ink pad counter

After selecting this option, click on OK.

Step No. 8
Now we select the options that appear to select, after that we click on CHECK to verify that everything is okay, we click on SET, then we click on initialization and then when this process is complete we click on FINISH. After this whole process we turn the printer off, We wait for about 30 seconds and turn it on again, so we have resumed the page counter which used to tell us that our printer had the ink tanks filled. see image...