Learn how to get rid of the full waste ink pad absorber error message on your canon mp360 printer in three simple steps.
When we talk about the Canon mp360 printer, we talk about a device with good overall functioning and great performance, especially because of its compact design. You can print, copy and scan, all at the same time with this printer.
This particular device can print up to 18 black-and-white pages per minute due to its high-speed performance, caused by the 2.0 USB cable it works with. It’s compatible with WindowsXP (service pack 1) and Windows 2000 (service pack 4). The Canon mp360 printer can work with many different page sizes, such as a letter, legal, A4, A5, 4 "x 6", 5 "x 7", USA. # 10 and envelope. You can also copy up to 18 pages per minute and make seamless copies.
However, after reaching a certain number of pages printed, you will receive an error message about the printing pads being filled with waste ink and need to be replaced to continue printing. This is a very normal situation, the manufacturer program this error to prevent an ink spill in the pads susceptible of causing further severe damage to the printer. The manufacturer will recommend taking the printer to an authorized technician to replace the printing pads, to save you some money and time, we have created this post to show you how to eliminate this error from the comfort of your home or office in some simple steps.
If you have any problem executing this procedure, please contact us by leaving a comment in the section below this post.
Procedure to get rid of the excess residual ink in canon printers marked with the 343 error message:
This process is also compatible with Canon mp360 and mp390 printer model.
Step #1:
While the printer is ON, press the following buttons in this sequence: settings - scanner - copy - scanner.
This procedure will get you in the printer’s service mode, where you will be able to configure the printer internally. Please stick to what we are doing in these steps to avoid irreparable damage.
Step #2:
Now select mode, which is the last option in the entire selection menu.
Step #3:
On this new menu, select the #8 or printer test option. The printer will now start a process where it seems to be cleaning something inside it. Once the numbers 8-2 and 8-3 are displayed on the printer’s screen, please press the + and - keys until 8-3 appears on its own. Then, click on the select button.
1. EEPROM clear will appear on the menu.
2. Set the ink counter back to zero (0) and press select again.
3. Finally, press the stop/reset and on/off buttons simultaneously. Your printer will now restart.
The page counter in your printer should now be restored. If it isn’t, please contact us by leaving a comment in the section below this post.
This particular device can print up to 18 black-and-white pages per minute due to its high-speed performance, caused by the 2.0 USB cable it works with. It’s compatible with WindowsXP (service pack 1) and Windows 2000 (service pack 4). The Canon mp360 printer can work with many different page sizes, such as a letter, legal, A4, A5, 4 "x 6", 5 "x 7", USA. # 10 and envelope. You can also copy up to 18 pages per minute and make seamless copies.
However, after reaching a certain number of pages printed, you will receive an error message about the printing pads being filled with waste ink and need to be replaced to continue printing. This is a very normal situation, the manufacturer program this error to prevent an ink spill in the pads susceptible of causing further severe damage to the printer. The manufacturer will recommend taking the printer to an authorized technician to replace the printing pads, to save you some money and time, we have created this post to show you how to eliminate this error from the comfort of your home or office in some simple steps.
If you have any problem executing this procedure, please contact us by leaving a comment in the section below this post.
Procedure to get rid of the excess residual ink in canon printers marked with the 343 error message:
This process is also compatible with Canon mp360 and mp390 printer model.
Step #1:
While the printer is ON, press the following buttons in this sequence: settings - scanner - copy - scanner.
This procedure will get you in the printer’s service mode, where you will be able to configure the printer internally. Please stick to what we are doing in these steps to avoid irreparable damage.
Step #2:
Now select mode, which is the last option in the entire selection menu.
Step #3:
On this new menu, select the #8 or printer test option. The printer will now start a process where it seems to be cleaning something inside it. Once the numbers 8-2 and 8-3 are displayed on the printer’s screen, please press the + and - keys until 8-3 appears on its own. Then, click on the select button.
1. EEPROM clear will appear on the menu.
2. Set the ink counter back to zero (0) and press select again.
3. Finally, press the stop/reset and on/off buttons simultaneously. Your printer will now restart.
The page counter in your printer should now be restored. If it isn’t, please contact us by leaving a comment in the section below this post.
COMMENTS