Learn how to get rid of the P02 error message on your Canon MP250 printer in eight brief steps.
When you stop using your printer and store it for a little while the P02 error message might appear when you start using it back, you can read the Canon codes error by clicking on the Ctrl+F shortcut to search the entire entry.
We are going to focus on the P02 error in this post, the P02 error message appears when the part of the printer transporting the cartridge carriage from the right to the left is blocked by a piece of sherd paper, paper clips, plastic or some broken part.
Also, the lack of lubricant and cleaning of the main axis could block the cartridge transportation.
However, if you have installed a Continuous Ink System on the printer, probably the hoses are not correctly connected and caused this error to appears: they could block the carriage, or not allowing it to reach the opposite side.
If you check and it is the case, it really simple to eliminate this error, you will have to adjust the hoses' length to allow the carriage to move from side to side.
Please double-check and make sure you have removed any objects susceptible to obstruct the cartridge carriage direction.
You may also be interested in learning how to refill Canon 210 Black and 211 Tricolor ink cartridges. There, you will also find a step-by-step tutorial that will help you restore your printer; we found that procedure online and haven’t tested it out in our workshop.
We have tested these steps in our workshop and it worked perfectly. We recommend following these steps if you want to eliminate this error on your printer if you have any other suggestion, please leave a comment below.
We are going to focus on the P02 error in this post, the P02 error message appears when the part of the printer transporting the cartridge carriage from the right to the left is blocked by a piece of sherd paper, paper clips, plastic or some broken part.
Also, the lack of lubricant and cleaning of the main axis could block the cartridge transportation.
 |
| black canon printer on store |
However, if you have installed a Continuous Ink System on the printer, probably the hoses are not correctly connected and caused this error to appears: they could block the carriage, or not allowing it to reach the opposite side.
If you check and it is the case, it really simple to eliminate this error, you will have to adjust the hoses' length to allow the carriage to move from side to side.
Please double-check and make sure you have removed any objects susceptible to obstruct the cartridge carriage direction.
You may also be interested in learning how to refill Canon 210 Black and 211 Tricolor ink cartridges. There, you will also find a step-by-step tutorial that will help you restore your printer; we found that procedure online and haven’t tested it out in our workshop.
Turn the multifunctional printer on:
1. Press the Menu button.
2. Press SCAN + COPY + SCAN to access your printer’s Service Mode.
3. Touch the + key until you’ve reached NVRAM ACCESS.
4. Once you’re there, press OK.
5. Using the + or - keys, locate yourself in Set ABS-M Level and choose OK.
6. Lower the number shown all the way down to 0. Press OK once this has been done.
7. Repeat steps 5 and 6 in Set ABS-P Level and hit OK once more.
8. Press the STOP button to exit Service Mode.
Turn the printer off and back again, and it’ll be ready.
This information has been collected from different sources and the collaboration credit goes to Raul.
This information has been collected from different sources and the collaboration credit goes to Raul.
We have tested these steps in our workshop and it worked perfectly. We recommend following these steps if you want to eliminate this error on your printer if you have any other suggestion, please leave a comment below.
COMMENTS